9 Tips Helping you to Extend the Life of Refrigeration Units

9 Tips Helping you to Extend the Life of Refrigeration Units:

Refrigeration units on the market are not cheap, but as a necessity for transportation. Extending its service life is also an important thing. Today TKT for you to explain: the use of transport refrigeration units need to pay attention to the 9tips.
1: The refrigerator to start when the reefer is running at low speed. Not at high speed; parking idle or engine low speed, the refrigerator can not keep the start state for a long time to avoid battery power loss. Parking, to close the refrigerator first, and then parking.
2: The newly purchased refrigerated truck, after a week of use, the compressor belt of the refrigerator must be tightened. Compressor belt is too loose, will cause the compressor clutch slipping belt squeaking, slowing down the compressor work frequency, weakening the refrigeration effect; belt too tight will lose engine horsepower, belt too loose will appear belt slippage, belt wear and tear.
3: Most refrigerated trucks using non-independent cold machine, cold machine compressor power from the refrigerated truck engine, therefore, before using the refrigeration machine, must first start the vehicle engine.
4: The use of refrigerated trucks in winter, first preheat the engine 3-5 minutes before starting the refrigeration unit. Winter refrigerated truck refrigerator is not often used, should be 1 to 2 times a week regularly open the refrigerator, so that it runs for about 10 minutes, to prevent the compressor lubricant sinking, parts lubrication is not in place.
5: The use of refrigerated trucks in the summer. In order to prevent the engine temperature is too high, should add enough cooling water, regularly check whether the thermostat is normal. As far as possible in the shade parking, driving attention to the water temperature table indication readings can not exceed 95 ℃.
6: The engine speed is not less than 1500 rpm, to ensure the fast and efficient operation of the compressor of the refrigerator.
7: When the refrigerated truck is driving, ensure that the condenser of the refrigeration unit dissipates heat well and clean the condenser debris regularly.
8: Ensure that the refrigerant of refrigerated truck is not missing. Check whether there is fluorine leakage in time, and replenish the refrigerant in time
9: In addition to pre-cooling the goods before loading, the refrigerated carriage should be pre-cooled. So that the heat in the compartment can be discharged (including the compartment wall and insulation materials) to better ensure the quality of the goods. The pre-cooling temperature of the compartment should be consistent with the temperature of the goods. The set temperature of the unit is too low and can not accelerate the cooling speed. While the set temperature is too high will affect the quality of the goods.
TKT believes that brand and quality go hand in hand, and on the road of our efforts, we hope you can also gain a knowledge.